Square in a square block cutting chart
Cut the centre square the finished block divided by √2, plus ½″, rounded up to the next ⅛″: 3⅜″ for a 4″ block, 4¾″ for 6″, 6¼″ for 8″, 9″ for 12″. The four corner triangles come from two squares of half the block plus ⅞″, each cut once on the diagonal.
Get every cut size from your own layout with Sashing →
Square in a square cutting chart, 4″ to 12″
These are the four sizes Sashing offers the block at, and the numbers its cutting chart prints. Every cut already has the ¼″ seams in it.
| Finished block | Centre square | Corner squares, cut once | Unfinished block |
|---|---|---|---|
| 4″ | 3⅜″ | 2 × 2⅞″ | 4½″ |
| 6″ | 4¾″ | 2 × 3⅞″ | 6½″ |
| 8″ | 6¼″ | 2 × 4⅞″ | 8½″ |
| 12″ | 9″ | 2 × 6⅞″ | 12½″ |
Two squares cut once on the diagonal give four triangles, which is exactly what one block needs. The unfinished size, finished + ½″, is what the sewn block should measure before it goes into the quilt.
What size to cut the centre square
The centre sits on point, so its side is not a fraction of the block — it is the block’s side divided by √2. A 12″ finished block has a centre whose finished side is 12 ÷ 1.4142 = 8.485″. Add ½″ for the two ¼″ seams and you want 8.985″, a number no ruler has a line for.
That is the one place in the whole library where the exact number is not on an ⅛″ mark, so it is rounded up to the next eighth: 9″. Up, never down, because a centre cut long is trimmed off at the end and a centre cut short takes the tips of the points with it. How much long varies by size:
- 4″ block: wants 3.328″, cut 3⅜″ — 0.047″ long.
- 6″ block: wants 4.743″, cut 4¾″ — 0.007″ long, less than a thread.
- 8″ block: wants 6.157″, cut 6¼″ — 0.093″ long, the worst of the four.
- 12″ block: wants 8.985″, cut 9″ — 0.015″ long.
The corners are plain half-square triangles with their straight grain on the outside of the block, so they follow the ordinary rule: squares of half the block + ⅞″, cut once. That ⅞″ is the same allowance explained in half-square triangle cut size — about 0.854″ of maths, rounded up to the nearest ruler line.
Why published charts disagree at some sizes
Because the exact centre is irrational, every chart has to round it, and not everyone rounds the same way. Three charts read on 29 September 2026:
| 8″ block, centre square | Rounding |
|---|---|
| 6.157″ | the exact figure |
| 6¼″ | Quilting Jetgirl — up to the next ⅛″, and Sashing |
| 6⅛″ | Piecemeal Quilts — to the nearest ⅛″ |
| 6⅛″ | Quiltville — to the nearest ⅛″ |
Both roundings are defensible, and they part company often: Quilting Jetgirl’s chart and Piecemeal Quilts’ disagree at 11 of the 23 sizes they both list. A nearest-eighth centre is up to a sixteenth of an inch small, which shows at the four points, and Quiltville handles that by cutting the corner triangles deliberately oversized and squaring the block down afterwards. Rounding up puts the slack in the centre instead and trims it the same way. Either is fine — what is not fine is taking the centre from one chart and the corners from another.
If a chart’s numbers disagree with the ones above, check its method before its arithmetic. That is true of every triangle unit: see flying geese cut size, where three methods give three different cut sizes and all three are right.
Square in a square, or an economy block?
Search for this block and some of the charts you find are for something else. A true square in a square is one square on point with four corner triangles. An economy block — sometimes published under the same name — is a square on point inside a square on point, two rounds of triangles, three fabrics.
You can tell them apart from the chart alone. If the centre is half the block plus ½″ and there are two rings of triangles, it is an economy block. Sashing has it as a separate block, offered at 6″ finished: a 3½″ centre, one 4¼″ square cut twice on the diagonal for the inner ring, and two 3⅞″ squares cut once for the outer ring. Note that the centre and inner ring together should measure 4¾″ before they go in — the same number as the square in a square centre’s cut size at that block size, which is why the two get confused.
The stitch-and-flip alternative
Some quilters avoid the odd centre measurement entirely. Cut a base square the finished block plus ½″, and four squares of half the block plus ½″. Sew one small square across each corner of the base on its diagonal, trim behind the seam and press out. The centre ends up on point with no irrational cut anywhere: for a 6″ block that is a 6½″ base and four 3½″ squares. Scissortail Quilting publishes a chart on this method from 2″ to 12″ (read 29 September 2026).
It uses noticeably more fabric — a 6″ block this way is 91 square inches of cut fabric against 53 the traditional way — and every seam is sewn on straight grain, with the bias cut away afterwards, which is why it is popular. Sashing’s chart uses the traditional cut-centre method above, so if you want to stitch and flip, work from the base-square numbers rather than the chart.
How many squares for a whole quilt
Per block it is one centre square and two corner squares. Multiply by the number of blocks, and that is the cutting list. Start a Throw in Sashing with 12″ Square in a Square blocks and the default 2″ sashing and you get 4 × 5 = 20 blocks, a 54 × 68″ centre before borders — the same grid as the Ohio Star throw worked through here.
- Centres: 20 squares at 9″. Four fit across 40″ of usable width, so 5 strips, 45″ of length, 1¼ yd.
- Corners: 40 squares at 6⅞″, cut once on the diagonal for 80 triangles. Five per strip, so 8 strips, 55″ of length, 1⅝ yd.
That is how Sashing plans it: 40″ of usable width, strips cut across the fabric, and yardage rounded up to the next ⅛ yd with ¼ yd as the smallest amount it will list. It covers the blocks only — sashing strips and cornerstones, borders, binding and backing are all on top. A pattern that plans on 42″ or carries its own safety margin will land somewhere else, and that is normal.
In a cutting chart those become two lines, “(20) 9″ squares” and “(40) 6⅞″ squares, cut once on the diagonal”, each against the fabric it belongs to. How to read a quilt cutting chart walks through that notation line by line.
Sashing
A quilt design app for Android. Lay out classic blocks with sashing and borders in photos of your own fabrics, then get the finished size, the yardage for every fabric and a cutting chart with the ¼″ seams added. Designing and seeing the quilt is free; the yardage, cutting chart and PDF are part of Sashing Pro, a subscription with a 3-day free trial.